Seafoam before or after new plugs....

General maintenance information area.
User avatar
Teachme
Prospect
Posts: 242
Joined: April 13th, 2010, 11:31 am
Location: Woodleaf ,NC

Seafoam before or after new plugs....

Postby Teachme » June 21st, 2012, 5:27 am

hey guys the ole vol is getting a little bit hard to start when she is cold well i take that back she starts up fine but wants to choke when pulling out. i fixed this issue 2 years ago with new plugs so i am gonna replace them again Question is i want to run some seafoam through her to clean out the carbs and all should i do that with the old plugs in then change plugs or change em and run the seafoam . figured the crud it cleaned may foul up the new plugs. thanks
Keep the rubber on the pavement !!!!!

User avatar
Cobra
VOL Original
Posts: 1181
Joined: March 11th, 2008, 8:20 am
Location: Iowa, Johnston

Re: Seafoam before or after new plugs....

Postby Cobra » June 21st, 2012, 8:22 am

Before

User avatar
Teachme
Prospect
Posts: 242
Joined: April 13th, 2010, 11:31 am
Location: Woodleaf ,NC

Re: Seafoam before or after new plugs....

Postby Teachme » June 21st, 2012, 8:29 am

That's what I was thinking to thanks

Sent from my transform ultra !
Keep the rubber on the pavement !!!!!


Return to “Maintenance”

Who is online

Users browsing this forum: No registered users and 2 guests